IDS vs. Traditional Chelating Agents — Why IDS Is Better

 For many years, EDTA, NTA, and phosphate-based chelators have been widely used. However, they are difficult to biodegrade and cause environmental problems such as eutrophication.

Tetrasodium Iminodisuccinate (IDS) solves these problems perfectly:
  • Biodegradation rate: over 90% within 28 days
  • No bioaccumulation, safe for aquatic life
  • High chelating efficiency comparable to traditional agents
  • Meets EU Ecolabel, USDA, and other green standards
  • More and more international brands are switching to IDS to upgrade their formulations and meet sustainable development goals.
    Kairui supplies high-quality Tetrasodium Iminodisuccinate with consistent performance and fast delivery. Contact us now for samples and quotations: export@krchemical.com

    • 评论

    发表评论

    此博客中的热门博文

    Polyamino Polyether Methylene Phosphonic Acid

      PAPEMP is a new kind of water treatment agent. PAPEMP has high chelation and dispersion effects, high value of calcium tolerance, and good scale inhibition effects. PAPEMP can be used as scale and corrosion inhibitor in circulating cool water system and oilfield refill water system in situations of high hardness, high alkali and high pH value. PAPEMP has excellent scale inhibition ability to calcium carbonate, calcium sulfate and calcium phosphate. PAPEMP can efficiently inhibit the formation of silica scale, stabilize metal ions such as Zn, Mn and Fe. PAPEMP can be used as scale inhibitor for reverse osmosis system and multistep flash vaporization system in which high salt concentration, high turbidity and high temperature are usually encountered (such as high temperature and high turbidity in coal vaporization system), accessory agent for woven & dyeing (for example, yellow turnback inhibition agent), as alternatives of EDTA, DTPA and NTA . Specification: Items Index Appea...
    阅读全文

    How to use Sticky Sludge Stripper

     A Sludge Stripper is a chemical specifically designed to remove slime, biofilm and algae from industrial circulating water systems. Below are some key points and recommendations when using a Sludge Stripper: 1. Dosing rate: - As a slime stripper: the recommended dosage is usually 100-200 milligrams per liter (mg/L) based on the amount of water retained in the system. - As an algaecide: the recommended dosage is 50-100 mg/L. 2. 2. Special case treatment: - If there are more algae in the system, in order to get faster killing and stripping effect, the dosage of KR-409 can be increased appropriately. 3. Fouling removal: - After the use of KR-409, if the circulating water appears to be fouled due to the stripping effect, these floating materials should be removed in time to prevent them from being redeposited in the system. 4. Avoid mixing: - Mud strippers should not be mixed with anionic surfactants such as polyacrylic acid (PAA) or hydroxypropylmethylacrylate (HPMA). - Similarly, sl...
    阅读全文

    what does hedp mean

      HEDP , or 1-Hydroxy Ethylidene-1,1-Diphosphonic Acid , is an important organophosphonic acid compound. The following is its brief introduction: Properties : HEDP is usually a colorless to light yellow transparent liquid, which can be miscible with water in any proportion, and raains stable under high pH value, not easy to be hydrolyzed, and not easy to be destroyed by acid and alkali.   Mechanism of action : It can form stable chelate with metal ions, and prevent metal ions from forming insoluble salt precipitation through chelation, so as to play the role of scale inhibition; at the same time, HEDP can form a layer of protective film on the metal surface to inhibit the corrosion of the metal to achieve corrosion inhibition effect. Application : HEDP is widely used in industrial field, it is an excellent water treatment agent, commonly used in boiler water treatment, circulating cooling water systa, etc. It can effectively prevent scale generation and me...
    阅读全文